Skip to content

Particulate concentrations

Particulate concentrations

Key Finding

Particle pollution is Queensland’s most significant air quality issue. Since 2009, windblown dust has been responsible for over 70% of all exceedances of the Ambient Air Quality NEPM 24-hour PM10 standard, mainly from wind erosion of bare ground during dry conditions. In 2023, PM10 levels increased in most regions, mainly due to more bushfires and hazard-reduction burning because of high vegetation fuel loads following two years of above-average rainfall.

Particle pollution is Queensland’s most significant air quality issue. In Queensland, particle concentrations have exceeded the NEPM (Ambient Air Quality) 24-hour average PM10 and PM2.5 standards of 50µg/m3 and 25µg/m3 since monitoring began in 1986.

Air particles come from many sources. Motor vehicles and industry play a part, but the following have the most significant impact on particle levels and year-to-year variations:

  • dust storms
  • bushfire smoke
  • agricultural or hazard-reduction burning

The particles generated can range from more than 50 micrometres (µm) in diameter to less than 1µm and can impact health and amenity.

  • Smaller particles—less than 10µm in diameter (PM10)—can affect human health.
  • Particles smaller than 2.5µm in diameter (PM2.5) may have more significant health impacts due to their deeper penetration of the lungs.

The National Environment Protection (Ambient Air Quality) Measures (NEPM) are standards established in Australia to regulate and monitor air quality to protect human health and the environment. Monitoring of PM10 happens in nine regions:

  • Southeast Queensland
  • South West Queensland
  • Gladstone
  • Mackay
  • Townsville
  • Mt Isa
  • Moranbah
  • Blackwater
  • Ayr.

Before 2018, monitoring of PM2.5 was undertaken in Southeast Queensland (SEQ) and Gladstone only. By 2023, monitoring rolled out progressively to all regions.

PM10 levels

Peaks in PM10 exceedances and annual average concentrations across all Queensland regions are associated with years when major dust storms occurred (2002, 2009 and 2019). Localised dust or bushfire smoke impacts were responsible for increases in some regions in other years (e.g. bushfires in the Gladstone region in 2012, 2018 and 2023).

Overall, PM10 levels are higher at inland locations compared to coastal areas due to lower rainfall, leading to more windblown dust. No clear trend in PM10 concentrations is evident over the past decade.

In the past decade, exceedances of the Ambient Air Quality NEPM PM10 annual average standard of 25µg/m3 occurred only once in:

  • South West Queensland (2019)
  • Blackwater (2019)
  • Mount Isa (2019).

In Moranbah, it occurred four times (2017 to 2019, 2023).

Since 2009, windblown dust has been responsible for over 70% of all exceedances of the Ambient Air Quality NEPM 24-hour PM10 standard, mainly from wind erosion of bare ground during dry conditions. This is particularly relevant for inland locations with lower annual rainfall, such as Mount Isa.

  • In 2014, 7 of SEQ’s 15 days of PM10 exceedances were due to dust from building construction works next to 1 monitoring station.
  • In 2012, Moranbah’s 36 days of PM10 exceedances related to dust from a housing estate development around the monitoring station.
  • In 2018 and 2019, extremely dry conditions triggered more dust storms and bushfires, increasing PM10 levels in all regions.
  • In 2023, PM10 levels increased in most regions, mainly due to more bushfires and hazard-reduction burning because of high vegetation fuel loads following two years of above-average rainfall.

PM2.5 levels

Peaks in PM2.5 exceedances and annual average concentrations largely coincide with years with heightened bushfire and/or hazard-reduction burning. Gladstone experienced greater than 10 days exceedance in 2009, 2011, 2018, and 2019 while Southeast Queensland recorded greater than 10 days exceedance in 2009, 2019 and 2023. South West Queensland only recorded greater than 10 days exceedance in 2019.

No clear trend in PM2.5 concentrations is evident over the past decade.

In the ten years up to 2023, the Ambient Air Quality NEPM PM2.5 annual average standard of 8µg/m3 was only exceeded in 2019 in Southeast Queensland and South West Queensland.

  • Since 2009, smoke from vegetation fires has been responsible for over 80% of all exceedances of the Ambient Air Quality NEPM 24-hour PM2.5 standard.
  • In 2018 and 2019, extremely dry conditions triggered more dust storms and bushfires, increasing PM2.5 levels in all regions.
  • In 2023, PM2.5 levels increased in most regions, mainly due to more bushfires and hazard-reduction burning because of high vegetation fuel loads following two years of above-average rainfall.

Climatic conditions exert the greatest influence on year-to-year variations.

The number of exceedances:

  • declined in wetter years, e.g. 2010, 2016, 2021 and 2022, when regions had five days or less
  • increased in drier years, e.g. 2002, 2009 and 2019, when regions had up to 33 days due to higher windblown dust levels and more vegetation fires and burnt areas.

Climate change impacts, such as higher predicted temperatures and lower predicted rainfall, are likely to increase particle pollution, with conditions leading to more prevalent dust storms and bushfires.

More information:

Relevant Sustainable Development Goals’ targets

Relevant Global Biodiversity Framework targets

Download data from Queensland Government Open Data Portal

Chart information is available to download raw data